Heat recovery steam generator

<h2 id="hrsgs">HRSGs</h2>

<p>HRSGs consist of four major components: the <a href="/facts/Economizer/snQPwxGp">economizer</a>, <a href="/facts/Evaporator/9VfjqeoA">evaporator</a>, <a href="/facts/Superheater/9Jq9HIu6">superheater</a> and water preheater. The different components are put together to meet the operating requirements of the unit. See the attached illustration of a Modular HRSG General Arrangement.
</p><p>Modular HRSGs can be categorized by a number of ways such as direction of <a href="/facts/Exhaust_gas/kLpq1eUX">exhaust gas</a> flow or number of pressure levels. Based on the flow of exhaust gases, HRSGs are categorized into vertical and horizontal types. In horizontal type HRSGs, exhaust gas flows horizontally over vertical tubes whereas in vertical type HRSGs, exhaust gas flows vertically over horizontal tubes. Based on pressure levels, HRSGs can be categorized into single pressure and multi pressure. Single pressure HRSGs have only one <a href="/facts/Steam_drum/FEnjlfQV">steam drum</a> and steam is generated at a single pressure level, whereas multi pressure HRSGs employ two (double pressure) or three (triple pressure) steam drums. As such, triple pressure HRSGs consist of three sections: an LP (low pressure) section, a reheat/IP (intermediate pressure) section, and an HP (high pressure) section. Each section has a steam drum and an <a href="/facts/Evaporator/9VfjqeoA">evaporator</a> section where water is converted to steam. This steam then passes through superheaters to raise the temperature beyond the <a href="/facts/Humidity/Nwb28VlT">saturation</a> point.
</p><p>The steam and water pressure parts of an HRSG are subjected to a wide range of degradation mechanisms, for example <a href="/facts/Creep_(deformation)/6GtcMsBt">creep</a>, thermal <a href="/facts/Fatigue_(material)/zmJY8hMt">fatigue</a>, creep-fatigue, mechanical fatigue, <a href="/facts/Flow_Accelerated_Corrosion/2ycrDPN4">Flow Accelerated Corrosion</a> (FAC), <a href="/facts/Corrosion/lIC7H4we">corrosion</a> and corrosion fatigue, amongst others.
</p><p>Additionally, HRSGs can include cold water heat exchangers designed to condense moisture in flue gases, reducing emissions and increasing efficiency.<a class="footnote-ref" id="fnref:1" href="#fn:1"><sup>1</sup></a>
</p>
<h2 id="packaged-hrsgs">Packaged HRSGs</h2>
<p>Packaged HRSGs are designed to be shipped as a fully assembled unit from the factory. They can be used in <a href="/facts/Waste_heat/nGBH1Vc8">waste heat</a> or turbine (usually under 20 MW) applications. The packaged HRSG can have a water-cooled furnace, which allows for higher supplemental firing and better overall efficiency.<a class="footnote-ref" id="fnref:2" href="#fn:2"><sup>2</sup></a>
</p>
<h2 id="variations">Variations</h2>

<p>Some HRSGs include supplemental, or duct firing. These additional burners provide additional energy to the HRSG, which produces more steam and hence increases the output of the <a href="/facts/Steam_turbine/scacVXsB">steam turbine</a>. Generally, duct firing provides electrical output at lower capital cost. It is therefore often utilized for peaking operations.
</p><p>HRSGs can also have diverter valves to regulate the inlet flow into the HRSG. This allows the gas turbine to continue to operate when there is no steam demand or if the HRSG needs to be taken offline.
</p><p>Emissions controls may also be located in the HRSG. Some may contain a <a href="/facts/Selective_catalytic_reduction/UU2bgnrB">selective catalytic reduction</a> system to reduce <a href="/facts/NOx/qd61Szdy">nitrogen oxides</a> (a large contributor to the formation of smog and acid rain) or a catalyst to remove <a href="/facts/Carbon_monoxide/CKuLtEMJ">carbon monoxide</a>. The inclusion of an SCR dramatically affects the layout of the HRSG. NOx catalyst performs best in temperatures between 650 and 750 °F (343–399 °C). This usually means that the evaporator section of the HRSG will have to be split and the SCR placed in between the two sections. Some low-temperature NOx catalysts have recently come to market that allow for the SCR to be placed between the evaporator and economizer sections (350–500 °F [177–260 °C]).<a class="footnote-ref" id="fnref:3" href="#fn:3"><sup>3</sup></a>
</p>

<h2 id="once-through-steam-generator-otsg">Once-through steam generator (OTSG)</h2>
<p>A specialized type of HRSG without boiler drums is the once-through steam generator. In this design, the inlet feedwater follows a continuous path without segmented sections for economizers, evaporators, and superheaters. This provides a high degree of flexibility as the sections are allowed to grow or contract based on the <a href="/facts/Heat_load/4wo1IF7z">heat load</a> being received from the gas turbine. The absence of drums allows for quick changes in steam production and fewer variables to control, and is ideal for cycling and base load operation. With proper material selection, an OTSG can be run dry, meaning the hot exhaust gases can pass over the tubes with no water flowing inside the tubes. This eliminates the need for a bypass stack and exhaust gas diverter system which is required to operate a combustion turbine with a drum-type HRSG out of service.<a class="footnote-ref" id="fnref:4" href="#fn:4"><sup>4</sup></a>
</p>
<h2 id="applications">Applications</h2>
<ul><li>Heat recovery can be used extensively in energy projects.</li>
<li>In the energy-rich <a href="/facts/Persian_Gulf/W78AfnC1">Persian Gulf</a> region, the steam from the HRSG is used for <a href="/facts/Desalination/feP0m9wS">desalination</a> plants.<a class="footnote-ref" id="fnref:5" href="#fn:5"><sup>5</sup></a></li>
<li>Universities are ideal candidates for HRSG applications. They can use a gas turbine to produce high-reliability electricity for campus use. The HRSG can recover the heat from the gas turbine to produce steam/hot water for <a href="/facts/District_heating/Y5tAbmUW">district heating</a> or cooling.<a class="footnote-ref" id="fnref:6" href="#fn:6"><sup>6</sup></a></li>
<li>Large ocean vessels (e.g., <a href="/facts/Emma_Maersk/7DDFYYb9">Emma Maersk</a>) make use of heat recovery so that their oil-fired boilers can be shut down while underway.<a class="footnote-ref" id="fnref:7" href="#fn:7"><sup>7</sup></a></li></ul>
<h2 id="block-diagram">Block diagram</h2>

<h2 id="see-also">See also</h2>
<ul><li><a href="/facts/Exhaust_heat_recovery_system/Gc3CaBrj">Exhaust heat recovery system</a></li>
<li>BMW <a href="/facts/Turbosteamer/nWWIG3kE">Turbosteamer</a></li>
<li><a href="/facts/Oxygenated_treatment/CqtecQcp">Oxygenated treatment</a></li>
<li><a href="/facts/Monotube_steam_generator/JuvW04uf">Monotube steam generator</a></li></ul>

<h2 id="external-links">External links</h2>
<ul><li><a href="https://web.archive.org/web/20210226085712/https://hrsgusers.org/">HRSG Users</a> <a href="https://web.archive.org/web/20210226085712/https://hrsgusers.org/">Archived</a> 2021-02-26 at the <a href="/facts/Wayback_Machine/nmQ3a6JC">Wayback Machine</a></li></ul>

<h2 id="references">References</h2>

<ol>
<li id="fn:1"><p>AITESA. Heat Recovery Steam Generators & Waste Heat Recovery Boilers <a href="https://aitesa.com/en/water-tube-heat-recovery-boilers/" target="_blank">https://aitesa.com/en/water-tube-heat-recovery-boilers/</a> <a href="#fnref:1" class="footnote-back-ref">↩</a></p></li>
<li id="fn:2"><p>AITESA. Heat Recovery Steam Generators & Waste Heat Recovery Boilers <a href="https://aitesa.com/en/water-tube-heat-recovery-boilers/" target="_blank">https://aitesa.com/en/water-tube-heat-recovery-boilers/</a> <a href="#fnref:2" class="footnote-back-ref">↩</a></p></li>
<li id="fn:3"><p>AITESA. Heat Recovery Steam Generators & Waste Heat Recovery Boilers <a href="https://aitesa.com/en/water-tube-heat-recovery-boilers/" target="_blank">https://aitesa.com/en/water-tube-heat-recovery-boilers/</a> <a href="#fnref:3" class="footnote-back-ref">↩</a></p></li>
<li id="fn:4"><p>Innovative Steam Technologies <a href="http://www.otsg.com" target="_blank">http://www.otsg.com</a> <a href="#fnref:4" class="footnote-back-ref">↩</a></p></li>
<li id="fn:5"><p>AITESA. Heat Recovery Steam Generators & Waste Heat Recovery Boilers <a href="https://aitesa.com/en/water-tube-heat-recovery-boilers/" target="_blank">https://aitesa.com/en/water-tube-heat-recovery-boilers/</a> <a href="#fnref:5" class="footnote-back-ref">↩</a></p></li>
<li id="fn:6"><p>AITESA. Heat Recovery Steam Generators & Waste Heat Recovery Boilers <a href="https://aitesa.com/en/water-tube-heat-recovery-boilers/" target="_blank">https://aitesa.com/en/water-tube-heat-recovery-boilers/</a> <a href="#fnref:6" class="footnote-back-ref">↩</a></p></li>
<li id="fn:7"><p>AITESA. Heat Recovery Steam Generators & Waste Heat Recovery Boilers <a href="https://aitesa.com/en/water-tube-heat-recovery-boilers/" target="_blank">https://aitesa.com/en/water-tube-heat-recovery-boilers/</a> <a href="#fnref:7" class="footnote-back-ref">↩</a></p></li>
</ol>

Heat recovery steam generator open-in-new

Heat recovery steam generator