The physical connector on the back of a CAMAC module is a card-edge connector, with a receiving socket on the backplane. Because there are no alignment pins on the socket or connector, there is the possibility of connector misalignment upon module insertion. Therefore, CAMAC modules may NOT be hot-swapped. Many devices are connected to it.
CAMAC shares low-voltage DC power with NIM crates. The crate supplies +6 V, −6 V, +12 V, −12 V, +24 V, and −24 V to all modules.
"The ESONE committee". Archived from the original on 3 March 2016. Retrieved 2 June 2009.{{cite web}}: CS1 maint: bot: original URL status unknown (link) https://web.archive.org/web/20160303174104/http://esone.web.cern.ch/ESONE/ ↩
ESONE letter[permanent dead link] http://www.cern.ch/ESONE/hibernation.pdf ↩