ST Robotics

<h2 id="history">History</h2>
In 1981, David Sands formed the company Intelligent Artefacts which was based in Cambridge, England. One of its products was educational robot arms. The arms were programmed in the <a href="/facts/Programming_language/cWTYbgWa">programming language</a> <a href="/facts/BASIC/VYMl5TmA">BASIC</a> and would run on any of the popular makes of computers of the time such as <a href="/facts/Apple_computer/oTJYta3k">Apple</a> (<a href="/facts/Apple_II/se82CNvK">Apple II</a>), <a href="/facts/Acorn_Electron/I0IDnl9N">Acorn Electron</a>, <a href="/facts/Atari_8-bit/aT04N5zR">Atari 8-bit</a>, <a href="/facts/BBC_Micro/YJxxPlIl">BBC Micro</a> or the <a href="/facts/Commodore_PET/08R12Xk4">PET</a>. The robot competed with others in that market like the Armdroid.<a class="footnote-ref" id="fnref:1" href="#fn:1">1</a> As the language <a href="/facts/Forth_(programming_language)/mYtWVNhF">Forth</a> became available on these computers, Sands wrote the first version of RoboForth which enabled the robots to run and respond far faster. A version of RoboForth was also written for Armdroid.
In 1982, Intelligent Artefacts was closed down and a new company formed, also in Cambridge, called Cyber Robotics who sold a redesigned arm known as the Cyber 310.<a class="footnote-ref" id="fnref:2" href="#fn:2">2</a> The Cyber 310 had a 5 <a href="/facts/Degrees_of_freedom_(mechanics)/2BqcdnLA">degrees of freedom</a> (DOF) ability. Hundreds of them were sold around the world between 1981 and 1987. The robot arm was adopted in 1987 by Mike Topping as the basis for the Handy 1,<a class="footnote-ref" id="fnref:3" href="#fn:3">3</a> a robotic helper for the severely disabled. Cyber Robotics was bought by the Bibby Corporation in 1982 and it was eventually closed due to lack of sales.
During the period that Intelligent Artifacts was in operation, many inquiries were received for more serious and professional uses of robot arms for which the Cyber 310 was not suitable. This alerted David Sands to the potential for manufacturing a bench–top robot arm series, some of which already existed, notably the <a href="/facts/Caliper_Life_Sciences/MGWSYmNT">Zymark</a>.
Sands Technology was formed in 1986 by David Sands with Catherine George who took the role as Director of R&D. The company began to manufacture robot arms, such as the R12 Mk1, R15 and R16, which were used in various applications, including DNA processing<a class="footnote-ref" id="fnref:4" href="#fn:4">4</a> and decommissioning nuclear reactors.<a class="footnote-ref" id="fnref:5" href="#fn:5">5</a>
In 1989, David Sands met Mathew Monforte in New Jersey and the pair decided to expand the company for the American market in 1991 and Sands Technology International was incorporated in New Jersey in 1992.<a class="footnote-ref" id="fnref:6" href="#fn:6">6</a> The less personal pseudonym of ST Robotics was coined in 1997 under which both companies now trade. Also in 1992 Sands Technology formed one of the first joint venture companies with the <a href="/facts/USSR/m7wWsPto">USSR</a> under <a href="/facts/Perestroika/KvdmEalx">Perestroika</a> with the formation of Association Robot in <a href="/facts/Ekaterinburg/PgF4pldC">Ekaterinburg</a>, now dormant.

<h2 id="technology">Technology</h2>
ST Robotics uses technology which is based on hybrid <a href="/facts/Stepping_motor/sksWdPsj">stepping motors</a> as opposed to the more usual DC <a href="/facts/Servo_motors/ytGSaxAV">servo motors</a>. For some years the technology had problems from lack of power and motor resonance. These problems were solved with the advent of rare–earth hybrid motors, high voltage micro-stepping drives and <a href="/facts/Incremental_encoder/5sWEjwjr">incremental encoder</a> feedback. The robots calibrate themselves by driving each axis slowly to a target sensed by a <a href="/facts/Proximity_detector/vmjXXDJh">proximity detector</a>.<a class="footnote-ref" id="fnref:7" href="#fn:7">7</a> Incremental optical encoders then track along with the motors to check for errors. This is similar to <a href="/facts/Control_theory/aIuERpn6">closed loop control</a> but differs from servo control in that the stepping motors run essentially open loop with the potential to close the loop in case of an error.
The ST robot controller uses two processors: an EZ80L92 runs the embedded RoboForth programming language and a Texas <a href="/facts/Digital_signal_processor/YuBXweos">digital signal processor</a> (DSP) to control the motors.<a class="footnote-ref" id="fnref:8" href="#fn:8">8</a> The DSP is able to control all axes collectively with individual axes ramping up or down as necessary for a compound motion. At the same time it reads back the encoders data and passes this information to the CPU which also uses the DSP's timers. RobWin is a GUI project manager for PC to create and edit projects and save them on disk but RoboForth, the user's program and all data are saved in flash memory in the controller.
In 2018 A new version of the R17, R17HS was created using Teknic motors on axes 1,2,3. These are fast, high power servo motors using the same step and direction signals as used by the stepper motor drivers. Axes 4,5 and optional 6 were left as stepping motors. HT voltage was increased to 75v. At this voltage steppers get very hot so the stepper drivers were changed to Geckodrive G214V to reduce heating and provide a current reduction at rest as well as much quieter operation. As a result, angular speeds of over 180 deg/sec are obtainable while carrying a 2 kg payload.
Also in 2018 a new teach console was added. The basic teach pad is still provided free with a robot but its functions are limited. The new teach console is an optional extra. The teach consoles for most robots are very expensive and require heavy cables between the console and the controller. ST solution is to use a 7-inch tablet that communicates with the controller via Bluetooth. This enables the user to get very close to the robot for careful positioning without any cable going back to the controller. It provides ability to position in Cartesian coordinates both in world and tool modes.
In 2019 ST adopted the Igus Delta robot and markets it as the R18 using an ST Robotics controller. The controller uses the EZ80 in 24 bit ADL mode and robot speeds of 2 cycles per second are possible.

<h2 id="products">Products</h2>
ST Robotics has 5 robot models
R12 - 5 or 6 axis low cost robot arm, 500g payload speeds up to 180 deg/s
R15 - 3 or 4 axis Cartesian robot system using Igus Cartesian robot system with an ST Robotics controller
R17 - 5 or 6 axis robot arm, 3 kg payload
R17HS - as R17 but using Teknic servomotors, 2 kg payload, speeds up to 180 deg/sec
R18 - Delta format arm based on Igus Delta robot with an ST Robotics controller.
Electric and pneumatic grippers and vacuum pickups are also available.

<h2 id="see-also">See also</h2>
<ul><li>RoboForth</li></ul>

<h2 id="external-links">External links</h2>
<ul><li><a href="http://www.strobotics.com">Official website</a></li></ul>

<h2 id="references">References</h2>

<ol>
<li id="fn:1">"The Colne Robotics ARMDROID — Construction and operation manual" (PDF). Colne Robotics. 1981. Retrieved 14 August 2010. <a href="http://www.senster.com/alex_zivanovic/armdroid/01-Introduction.pdf" target="_blank">http://www.senster.com/alex_zivanovic/armdroid/01-Introduction.pdf</a> <a href="#fnref:1" class="footnote-back-ref">↩</a></li>
<li id="fn:2">"BeebControl>>Robot arms>>Cyber 310". Nildram — BeebControl. Retrieved 14 August 2010. <a href="http://www.anf.nildram.co.uk/beebcontrol/arms/cyber/index.html" target="_blank">http://www.anf.nildram.co.uk/beebcontrol/arms/cyber/index.html</a> <a href="#fnref:2" class="footnote-back-ref">↩</a></li>
<li id="fn:3">Topping, Mike; Smith, Jane (1999). "An Overview Of Handy 1, A Rehabilitation Robot For The Severely Disabled". CSUN Center on Disabilities Conference Proceedings. 1999 Conference Proceedings: Session 59. Archived from the original on 5 August 2009. Retrieved 14 August 2010. The early version of the Handy 1 system consisted of a Cyber 310 robotic arm with five degrees of freedom plus a gripper. <a href="https://web.archive.org/web/20090805111627/https://www.csun.edu/cod/conf/1999/proceedings/session0059.htm" target="_blank">https://web.archive.org/web/20090805111627/https://www.csun.edu/cod/conf/1999/proceedings/session0059.htm</a> <a href="#fnref:3" class="footnote-back-ref">↩</a></li>
<li id="fn:4">Sullivan, K., Andrew Hopwood, Jill Brookes, Adam Shariff, Peter Cage, Elaine Tatum, Raz Mirza, Malcolm Crook, Keith Brews, Kevin Sullivan. The Forensic Science Service, Process Analysis and Automation Ltd, Hamilton (G.B.) Ltd (1997). "A Fully Integrated Robotic System for High Sample Throughput Within a DNA Databasing Unit". Promega. Retrieved 14 August 2010.{{cite web}}: CS1 maint: multiple names: authors list (link) <a href="http://www.promega.com/geneticidproc/ussymp8proc/09.html" target="_blank">http://www.promega.com/geneticidproc/ussymp8proc/09.html</a> <a href="#fnref:4" class="footnote-back-ref">↩</a></li>
<li id="fn:5">Sands, David (2006). "Cost effective robotics in the nuclear industry". Industrial Robot. 33 (3). Emerald Group Publishing Limited: 170–173. doi:10.1108/01439910610659079. Retrieved 14 August 2010. <a href="http://www.emeraldinsight.com/journals.htm?articleid=1550613&show=abstract" target="_blank">http://www.emeraldinsight.com/journals.htm?articleid=1550613&show=abstract</a> <a href="#fnref:5" class="footnote-back-ref">↩</a></li>
<li id="fn:6">"Robotics in Pharmaceutical Research". Samedan Ltd Pharmaceuticals Publishers. Retrieved 14 August 2010. <a href="http://www.samedanltd.com/?mod=magazine&id=12&page=article&issid=40&pid=1057&post" target="_blank">http://www.samedanltd.com/?mod=magazine&id=12&page=article&issid=40&pid=1057&post</a> <a href="#fnref:6" class="footnote-back-ref">↩</a></li>
<li id="fn:7">Sands, David (2006). "Cost effective robotics in the nuclear industry". Industrial Robot. 33 (3). Emerald Group Publishing Limited: 170–173. doi:10.1108/01439910610659079. Retrieved 14 August 2010. <a href="http://www.emeraldinsight.com/journals.htm?articleid=1550613&show=abstract" target="_blank">http://www.emeraldinsight.com/journals.htm?articleid=1550613&show=abstract</a> <a href="#fnref:7" class="footnote-back-ref">↩</a></li>
<li id="fn:8">"Robot Controller" (HTNL). ST Robotics. Retrieved 14 August 2010. <a href="http://www.strobotics.com/k11r.htm" target="_blank">http://www.strobotics.com/k11r.htm</a> <a href="#fnref:8" class="footnote-back-ref">↩</a></li>
</ol>

ST Robotics open-in-new

ST Robotics