The apogee engine traces its origin to the early 1960s, when companies such as Aerojet, Rocketdyne, Reaction Motors, Bell Aerosystems, TRW Inc. and The Marquardt Company were all participants in developing engines for various satellites and spacecraft.8
Derivatives of these original engines are still used today and are continually being evolved91011 and adapted for new applications.12
A typical liquid apogee engine scheme could be defined13 as an engine with:
To protect the spacecraft from the radiant heat of the combustion chamber, these engines are generally installed together with a heat shield.
Apogee engines typically use one fuel and one oxidizer. This propellant is usually, but not restricted to,14 a hypergolic combination such as:
Hypergolic propellant combinations ignite upon contact within the engine combustion chamber and offer very high ignition reliability, as well as the ability for reignition.
In many instances mixed oxides of nitrogen (MON), such as MON-3 (N2O4 with 3 wt% NO), is used as a substitute for pure N2O4.15
The use of N2H4 is under threat in Europe due to REACH regulations. In 2011 the REACH framework legislation added N2H4 to its candidate list of substances of very high concern. This step increases the risk that the use of N2H4 will be prohibited or restricted in the near- to mid-term.1617
Exemptions are being sought to allow N2H4 to be used for space applications, however to mitigate this risk, companies are investigating alternative propellants and engine designs.18 A change over to these alternative propellants is not straightforward, and issues such as performance, reliability and compatibility (e.g. satellite propulsion system and launch-site infrastructure) require investigation.19
The performance of an apogee engine is usually quoted in terms of vacuum specific impulse and vacuum thrust. However, there are many other details which influence performance:
A typical 500 N-class hypergolic liquid apogee engine has a vacuum specific impulse in the region of 320 s,20212223 with the practical limit estimated to be near 335 s.24
Though marketed to deliver a particular nominal thrust and nominal specific impulse at nominal propellant feed conditions, these engines actually undergo rigorous testing where performance is mapped over a range of operating conditions before being deemed flight-qualified. This means that a flight-qualified production engine can be tuned (within reason) by the manufacturer to meet particular mission requirements, such as higher thrust.25
Most apogee engines are operated in an on–off manner at a fixed thrust level. This is because the valves used only have two positions: open or closed.26
The duration for which the engine is on, sometimes referred to as the burn duration, depends both on the manoeuvre and the capability of the engine. Engines are qualified for a certain minimal and maximal single-burn duration.
Engines are also qualified to deliver a maximal cumulative burn duration, sometimes referred to as cumulative propellant throughput. The useful life of an engine at a particular performance level is dictated by the useful life of the materials of construction, primarily those used for the combustion chamber.27
A simplified division can be made between apogee engines used for telecommunications and exploration missions:
The actual engine chosen for a mission is dependent on the technical details of the mission. More practical considerations such as cost, lead time and export restrictions (e.g. ITAR) also play a part in the decision.
"Unified Propulsion System - Background". Airbus Defence and Space. Archived from the original on 2014-09-25. Retrieved 29 January 2015. https://web.archive.org/web/20140925020530/http://cs.astrium.eads.net/sp/spacecraft-propulsion/propulsion-systems/ups-background.html ↩
Amos, Jonathan (2012-09-04). "Juno Jupiter probe gets British boost". BBC News. Retrieved 29 January 2015. https://www.bbc.co.uk/news/science-environment-19477618 ↩
Domingue, D. L.; Russell, C. T. (19 December 2007). The MESSENGER Mission to Mercury. Springer Science & Business Media. p. 197. ISBN 978-0-387-77214-1. 978-0-387-77214-1 ↩
"Industrial Policy Committee, Robotic Exploration Plan, Programme of Work 2009-2014 and relevant Procurement Plan" (PDF). European Space Agency. Archived from the original (PDF) on 2016-03-03. Retrieved 25 January 2015. https://web.archive.org/web/20160303205908/http://emits.sso.esa.int/emits-doc/ESTEC/ESAIPC(2010)136_RobotExp2009-2014.pdf ↩
Pocha, J. J. (1987). "The Apogee Manoeuvre". Space Technology Library Volume 1. An introduction to mission design for geostationary satellites. Chapter 4: The Apogee Manoeuvre. Springer. pp. 51–66. doi:10.1007/978-94-009-3857-1_4. ISBN 978-94-010-8215-0. 978-94-010-8215-0 ↩
Ley, Wilfred; Wittmann, Klaus; Hallmann, Willi, eds. (2009). Handbook of space technology. John Wiley & Sons, Ltd. pp. 323–324. ISBN 978-0-470-69739-9. 978-0-470-69739-9 ↩
Stechman, Carl; Harper, Steve (2010). "Performance improvements in small earth storable rocket engines - an era of approaching the theoretical". 46th AIAA/ASME/SAE/ASEE Joint Propulsion Conference (2010–6884). ↩
"ESA investigates ALM for in-space satellite engines". LayerWise. Archived from the original on 2014-11-29. Retrieved 15 November 2014. https://web.archive.org/web/20141129025200/http://www.layerwise.com/esa-investigates-alm-for-satellite-engines/ ↩
Hyde, Simon (2012). "Combustion chamber design for additive manufacturing". Space Propulsion 2012 Conference, Bordeaux, France. ↩
Hyde, Simon (2012). "A design optimisation study of a generic bi-propellant injector for additive manufacturing". Space Propulsion 2012 Conference, Bordeaux, France. ↩
Werner, Debra (2013-07-15). "Space propulsion - Moog sees higher-thrust liquid propellant engine as right fit for Mars missions". www.spacenews.com. Archived from the original on November 15, 2014. Retrieved 15 November 2014. https://archive.today/20141115141244/http://www.spacenews.com/article/launch-report/36251space-propulsion-moog-sees-higher-thrust-liquid-propellant-engine-as ↩
Naicker, Lolan; Wall, Ronan; David, Perigo (2014). "An overview of development model testing for the LEROS 4 High Thrust Apogee Engine". Space Propulsion 2014 Conference, Cologne, Germany (2969298). ↩
Wright, A. C. (February 1977). USAF Propellant Handbooks: Nitric Acid / Nitrogen Tetroxide Oxidizers (AFRPL-TR-76-76 ed.). Martin Marietta Corporation. p. 2.3–3. ↩
"Considering hydrazine-free satellite propulsion". ESA. Retrieved 15 November 2014. http://www.esa.int/Our_Activities/Space_Engineering/Clean_Space/Considering_hydrazine-free_satellite_propulsion ↩
Valencia-Bel, Ferran (2012). "Replacement of Conventional Spacecraft Propellants with Green Propellants". Space Propulsion 2012 Conference, Bordeaux, France. ↩
"Green propulsion". www.sscspace.com. Archived from the original on 29 November 2014. Retrieved 15 November 2014. https://web.archive.org/web/20141129020503/http://www.sscspace.com/green-propulsion-1 ↩
"Apogee/Upper Stage Thrusters". www.moog.com. Archived from the original on 2015-03-02. Retrieved 15 November 2014. https://web.archive.org/web/20150302221448/http://www.moog.com/products/thrusters/apogee-upper-stage-thrusters/ ↩
"400 N Bipropellant Apogee Motors". Astrium Space Propulsion. Archived from the original on 2014-04-26. Retrieved 15 November 2014. https://web.archive.org/web/20140426211933/http://cs.astrium.eads.net/sp/spacecraft-propulsion/apogee-motors/400n-apogee-motor.html ↩
"Bipropellant Rocket Engines". www.rocket.com. Retrieved 15 November 2014. http://www.rocket.com/propulsion-systems/bipropellant-rockets ↩
"Satellite Propulsion System". www.ihi.co.jp. Archived from the original on 24 November 2014. Retrieved 15 November 2014. https://web.archive.org/web/20141124030638/http://www.ihi.co.jp/ia/en/product/satellite01.html ↩
"LEROS engine propels the Juno spacecraft on its historic voyage to Jupiter". Retrieved 15 November 2014. http://www.prnewswire.com/news-releases/leros-engine-propels-the-juno-spacecraft-on-its-historic-voyage-to-jupiter-133466283.html ↩
Houston, Martin; Smith, Pete; Naicker, Lolan; Perigo, David; Wall, Ronan (2014). "A high flow rate apogee engine solenoid valve for the next generation of ESA planetary missions". Space Propulsion 2014 Conference, Cologne, Germany (2962486). ↩
Naicker, Lolan; Baker, Adam; Coxhill, Ian; Hammond, Jeff; Martin, Houston; Perigo, David; Solway, Nick; Wall, Ronan (2012). "Progress towards a 1.1 kN apogee engine for interplanetary propulsion". Space Propulsion 2012, Bordeaux, France (2394092). ↩
Perigo, David (2012). "Large platform satellite propulsion with a focus on exploration applications". Space Propulsion 2012 Conference, San Sebastian, Spain. ↩