In-circuit emulation

<h2 id="function">Function</h2>
<p>An in-circuit emulator (ICE) provides a window into the embedded system. The programmer uses the emulator to load programs into the embedded system, run them, <a href="/facts/Stepping_(debugging)/2BtbtxEN">step through them</a> slowly, and view and change data used by the system's software.
</p><p>An <i>emulator</i> gets its name because it emulates (imitates) the <a href="/facts/Central_processing_unit/Jxp1bqMV">central processing unit</a> (CPU) of the embedded system's computer. Traditionally it had a plug that inserts into the socket where the CPU <a href="/facts/Integrated_circuit/fjn6vg7C">integrated circuit</a> chip would normally be placed. Most modern systems use the target system's CPU directly, with special JTAG-based debug access. Emulating the processor, or direct JTAG access to it, lets the ICE do anything that the processor can do, but under the control of a software developer.
</p><p>ICEs attach a <a href="/facts/Computer_terminal/fSlx05qV">computer terminal</a> or <a href="/facts/Personal_computer/koaYfNce">personal computer</a> (PC) to the embedded system. The terminal or PC provides an interactive <a href="/facts/User_interface/e9sPEWVD">user interface</a> for the programmer to investigate and control the embedded system. For example, it is routine to have a source code level <a href="/facts/Debugger/mCe6UsWj">debugger</a> with a graphical windowing interface that communicates through a JTAG adapter (emulator) to an embedded target system which has no graphical user interface.
</p><p>Notably, when their program fails, most embedded systems simply become <a href="/facts/Bricked/7ajwM0L5">bricked</a>. Embedded systems often lack basic functions to detect signs of <a href="/facts/Software_failure/I1uSXySv">software failure</a>, such as a <a href="/facts/Memory_management_unit/tJQtAQzI">memory management unit</a> (MMU) to catch memory access errors. Without an ICE, the development of embedded systems can be extremely difficult, because there is usually no way to tell what went wrong. With an ICE, the programmer can usually test pieces of code, then isolate the fault to a particular section of code, and then inspect the failing code and rewrite it to solve the problem.
</p><p>In usage, an ICE provides the programmer with execution <a href="/facts/Breakpoint/LgtYUIlq">breakpoints</a>, memory display and monitoring, and input/output control. Beyond this, the ICE can be programmed to look for any range of matching criteria to pause at, in an attempt to identify the origin of a failure.
</p><p>Most modern <a href="/facts/Microcontroller/MKrnAhnm">microcontrollers</a> use resources provided on the manufactured version of the microcontroller for device programming, emulating, and debugging features, instead of needing another special emulation-version (that is, bond-out) of the target microcontroller.<a class="footnote-ref" id="fnref:1" href="#fn:1"><sup>1</sup></a> Even though it is a cost-effective method, since the ICE unit only manages the emulation instead of actually emulating the target microcontroller, trade-offs must be made to keep prices low at manufacture time, yet provide enough emulation features for the (relatively few) emulation applications.
</p>
<h2 id="advantages">Advantages</h2>
<p>Virtually all embedded systems have a hardware element and a software element, which are separate but tightly interdependent. The ICE allows the software element to be run and tested on the hardware on which it is to run, but still allows programmer conveniences to help isolate faulty code, such as <i>source-level debugging</i> (which shows a program as it was originally written) and <i>single-stepping</i> (which lets programmers run programs step-by-step to find errors).
</p><p>Most ICEs consist of an adaptor unit that sits between the ICE host computer and the system to be tested. A <a href="/facts/Pin_header/dnsYKYpn">pin header</a> and cable assembly connects the adaptor to a socket where the actual <a href="/facts/Central_processing_unit/Jxp1bqMV">central processing unit</a> (CPU) or <a href="/facts/Microcontroller/MKrnAhnm">microcontroller</a> mounts within the embedded system. Recent ICEs enable programmers to access the on-chip debug circuit that is integrated into the CPU via JTAG or <a href="/facts/Background_debug_mode_interface/L6Rccpo6">background debug mode interface</a> (BDM) to debug the software of an embedded system. These systems often use a standard version of the CPU chip, and can simply attach to a debug port on a production system. They are sometimes called in-circuit debuggers or ICDs, to distinguish the fact that they do not replicate the functionality of the CPU, but instead control an already existing, standard CPU. Since the CPU need not be replaced, they can operate on production units where the CPU is soldered in and cannot be replaced. On x86 Pentiums, a special 'probe mode' is used by ICEs to aid in debugging.<a class="footnote-ref" id="fnref:2" href="#fn:2"><sup>2</sup></a>
</p><p>In the context of embedded systems, the ICE is not emulating hardware. Rather, it is providing direct debug access to the actual CPU. The system under test is under full control, allowing the developer to load, debug and test code directly.
</p><p>Most host systems are ordinary commercial computers unrelated to the CPU used for development. For example, a <a href="/facts/Linux/9FvCKSTq">Linux</a> PC might be used to develop software for a system using a <a href="/facts/Freescale_68HC11/7p1pn24u">Freescale 68HC11</a> chip, a processor that cannot run Linux.
</p><p>The programmer usually edits and compiles the embedded system's code on the host system, as well. The host system will have special compilers that produce executable code for the embedded system, termed <a href="/facts/Cross_compiler/8hXgCWB9">cross compilers</a> or cross <a href="/facts/Assembler_(computing)/7XuV0cla">assemblers</a>.
</p>
<h2 id="on-chip-debugging">On-chip debugging</h2>
<p><i>On-chip debugging</i> is an alternative to in-circuit emulation. It uses a different approach to address a similar goal.
</p><p>On-chip debugging, often loosely termed as <i>Joint Test Action Group</i> (JTAG), uses the provision of an additional debugging interface to the live hardware, in the production system. It provides the same features as in-circuit debugging, such as inspection of internal state or variables and may have the ability to set checkpoints, breakpoints and watchpoints. The difference is that this is provided by additional silicon within the production processor, rather than swapping the processor for an off-board debugging emulator.  For this reason, some of the functions of the ICE is changed by the specifications of the processor. An additional JTAG interface is added to the controller board, and this is required on every production system, but as this only requires a few signal pins the extra cost is minimal.  JTAG interfaces were originally developed for, and are still useful for, end of production testing.
</p>
<h2 id="intel">Intel</h2>
<p>To support in-circuit emulator (ICE) debugging on  <a href="/facts/Intel_286/rucEU93g">Intel 286</a>, five additional pins were available on the processor: one input pin to externally force an ICE breakpoint, (ICEBP#) and two alternative pairs of output pins to select operations via the ICE-bus instead of user memory.<a class="footnote-ref" id="fnref:3" href="#fn:3"><sup>3</sup></a>  On the 80286 two instructions (0F 04, <a href="/facts/LOADALL/ombEb6qk">0F 05</a>) exist to dump/restore the complete CPU state to memory offset 0x800, along with a single-byte override prefix (F1) to enable ICE-mode to access user-memory.
</p>
<h2 id="see-also">See also</h2>
<ul><li><a href="/facts/Joint_Test_Action_Group/IxRc5rG7">Joint Test Action Group</a></li>
<li><a href="/facts/Background_debug_mode_interface/L6Rccpo6">Background debug mode interface</a></li>
<li><a href="/facts/Hardware-assisted_virtualization/n4kjJLqA">Hardware-assisted virtualization</a></li>
<li><a href="/facts/SoftICE/AHngzMfx">SoftICE</a></li></ul>

<h2 id="external-links">External links</h2>
<ul><li><a href="http://www.ganssle.com/articles/BegincornerICE.htm">Jack Ganssle's Beginner's Corner article</a></li>
<li><a href="http://www.eetimes.com/document.asp?doc_id=1200927">How to choose an in-circuit emulator By Jonathan Hector</a></li></ul>

<h2 id="references">References</h2>

<ol>
<li id="fn:1"><p>Keil, Reinhard (July 22, 2008). "Debugging with Cortex-M3 Microcontrollers". www.embedded.com. Retrieved May 25, 2013. <a href="https://www.embedded.com/design/mcus-processors-and-socs/4007634/PRODUCT-HOW-TO-Debugging-with-Cortex-M3-Microcontrollers" target="_blank">https://www.embedded.com/design/mcus-processors-and-socs/4007634/PRODUCT-HOW-TO-Debugging-with-Cortex-M3-Microcontrollers</a> <a href="#fnref:1" class="footnote-back-ref">↩</a></p></li>
<li id="fn:2"><p>"Overview of Pentium Probe Mode". <a href="http://www.rcollins.org/articles/probemd/ProbeMode.html" target="_blank">http://www.rcollins.org/articles/probemd/ProbeMode.html</a> <a href="#fnref:2" class="footnote-back-ref">↩</a></p></li>
<li id="fn:3"><p>US patent 4547849, Louie, Glenn; Retter, Rafi & Shaanan, Neve et al., "Interface between a Microprocessor and a Coprocessor", issued October 15, 1985,  assigned to Intel Corporation  "User bus cycle status signals, S1# and S0# support the user's bus and ICE bus cycle status signals, ICES1# and ICES0# support the ICE bus. … The ICE bus is used only for Data Read, Code Read, Halt, Shutdown, and Memory Write cycles. … microprocessor is forced to compatible mode at reset, … it cannot be switched back to compatible mode except by reset (or ICE breakpoint), … ICE must be given special attention since it is the only case in which a switch of the master microprocessor from protection mode to compatibility mode can occur (except for reset). … ICE software begins execution following an ICE breakpoint in compatibility mode and then switches to protection mode for the bulk of its operations." <a href="https://patentimages.storage.googleapis.com/97/6f/f7/5d970cf466267a/US4547849.pdf" target="_blank">https://patentimages.storage.googleapis.com/97/6f/f7/5d970cf466267a/US4547849.pdf</a> <a href="#fnref:3" class="footnote-back-ref">↩</a></p></li>
</ol>

In-circuit emulation open-in-new

In-circuit emulation