Menu
Home
People
Places
Arts
History
Plants & Animals
Science
Life & Culture
Technology
Reference.org
Chemical nomenclature
open-in-new
<h2 id="purpose-of-chemical-nomenclature">Purpose of chemical nomenclature</h2> <p>The main purpose of chemical nomenclature is to disambiguate the spoken or written names of chemical compounds: each name should refer to one compound. Secondarily, each compound should have only one name, although in some cases some alternative names are accepted. </p><p>Preferably, the name should also represent the structure or chemistry of a compound. This is achieved by the <a href="/facts/International_Chemical_Identifier/6yR96JYR">International Chemical Identifier</a> (InChI) nomenclature. However, the <a href="/facts/American_Chemical_Society/Alf3uhaF">American Chemical Society</a>'s <a href="/facts/CAS_number/zjXjCGPx">CAS numbers</a> nomenclature does not represent a compound's structure. </p><p>The nomenclature used depends on the needs of the user, so no single correct nomenclature exists. Rather, different nomenclatures are appropriate for different circumstances. </p><p>A <a href="/facts/Common_name_(chemistry)/UWV8LfCB">common name</a> will successfully identify a chemical compound, given context. Without context, the name should indicate at least the <a href="/facts/Chemical_composition/vjo4uMQ0">chemical composition</a>. To be more specific, the name may need to represent the three-dimensional arrangement of the atoms. This requires adding more rules to the standard IUPAC system (the <a href="/facts/Chemical_Abstracts_Service/CVLrS5IJ">Chemical Abstracts Service</a> system (CAS system) is the one used most commonly in this context), at the expense of having names which are longer and less familiar. </p><p>The IUPAC system is often criticized for failing to distinguish relevant compounds (for example, for differing reactivity of <a href="/facts/Allotropes_of_sulfur/b1TUYVFQ">sulfur allotropes</a>, which IUPAC does not distinguish). While IUPAC has a human-readable advantage over CAS numbering, IUPAC names for some larger, relevant molecules (such as <a href="/facts/Rapamycin/9hdLP135">rapamycin</a>) are barely human-readable, so common names are used instead. </p> <h2 id="differing-needs-of-chemical-nomenclature-and-lexicography">Differing needs of chemical nomenclature and lexicography</h2> <p>It is generally understood that the purposes of <a href="/facts/Lexicography/3btFWjIx">lexicography</a> versus chemical nomenclature vary and are to an extent at odds. Dictionaries of words, whether in traditional print or on the internet, collect and report the meanings of words as their uses appear and change over time. For internet dictionaries with limited or no formal editorial process, definitions —in this case, definitions of chemical names and terms— can change rapidly without concern for the formal or historical meanings. Chemical nomenclature however (with <a href="/facts/IUPAC/2AV6myCK">IUPAC</a> nomenclature as the best example) is necessarily more restrictive: Its purpose is to standardize communication and practice so that, when a chemical term is used it has a fixed meaning relating to chemical structure, thereby giving insights into chemical properties and derived molecular functions. These differing purposes can affect understanding, especially with regard to chemical classes that have achieved popular attention. Examples of the effect of these are as follows: </p> <ul><li><a href="/facts/Resveratrol/5sF3fvl7">resveratrol</a>, a single compound defined clearly by this common name, but that can be confused, popularly, with its <a href="/facts/Cis%25E2%2580%2593trans_isomerism/vqlchJly"><i>cis</i>-isomer</a>,</li> <li><a href="/facts/Omega-3_fatty_acid/X72Ynqov">omega-3 fatty acids</a>, a reasonably well-defined class of chemical structures that is nevertheless broad as a result of its formal definition, and</li> <li><a href="/facts/Polyphenol/H6Q7QIQH">polyphenols</a>, a fairly broad structural class with a formal definition, but where mistranslations and general misuse of the term relative to the formal definition has resulted in serious errors of usage, and so ambiguity in the relationship between structure and activity (<a href="/facts/Structure%25E2%2580%2593activity_relationship/S2RxpCUK">SAR</a>).</li></ul> <p>The rapid pace at which meanings can change on the internet, in particular for chemical compounds with perceived health benefits, ascribed rightly or wrongly, complicate the monosemy of nomenclature (and so access to SAR understanding). Specific examples appear in the <i><a href="/facts/Polyphenol/H6Q7QIQH">Polyphenol</a></i> article, where varying internet and common-use definitions conflict with any accepted chemical nomenclature connecting polyphenol structure and <a href="/facts/Bioactivity/jJ14jyvc">bioactivity</a>. </p> <h2 id="history">History</h2> <h3>Alchemical names</h3> <p>The <a href="/facts/List_of_alchemical_substances/jLzRjtSV">nomenclature of alchemy</a> is descriptive, but does not effectively represent the functions mentioned above. Opinions differ about whether this was deliberate on the part of the early practitioners of <a href="/facts/Alchemy/CEx0U1Em">alchemy</a> or whether it was a consequence of the particular (and often esoteric) theories according to which they worked. While both explanations are probably valid to some extent, it is remarkable that the first "modern" system of chemical nomenclature appeared at the same time as the distinction (by French chemist <a href="/facts/Antoine_Lavoisier/UheVQrhu">Antoine Lavoisier</a>) between <a href="/facts/Chemical_element/0jducgWD">elements</a> and <a href="/facts/Chemical_compound/37FXqqtv">compounds</a>, during the late eighteenth century. </p> <h3><i>Méthode de nomenclature chimique</i></h3> <p>The French chemist <a href="/facts/Louis-Bernard_Guyton_de_Morveau/GzTxXmwH">Louis-Bernard Guyton de Morveau</a> published his recommendations in 1782,<a class="footnote-ref" id="fnref:10" href="#fn:10"><sup>10</sup></a> hoping that his "constant method of denomination" would "help the intelligence and relieve the memory". The system was refined in <i>Méthode de nomenclature chimique [fr]</i>,<a class="footnote-ref" id="fnref:11" href="#fn:11"><sup>11</sup></a> published in 1787 in collaboration with Lavoisier, <a href="/facts/Berthollet/JeduoWk5">Claude Louis Berthollet</a>, and <a href="/facts/Antoine_Fran%25C3%25A7ois%2c_comte_de_Fourcroy/GjT9JwUn">Antoine-François de Fourcroy</a>, and translated into English as <i>Method of Chymical Nomenclature</i> by James St. John in 1788.<a class="footnote-ref" id="fnref:12" href="#fn:12"><sup>12</sup></a> <i>Méthode de nomenclature chimique</i> contained handy dictionaries<a class="footnote-ref" id="fnref:13" href="#fn:13"><sup>13</sup></a> in which older chemical names were listed with their new counterparts<a class="footnote-ref" id="fnref:14" href="#fn:14"><sup>14</sup></a> and vice versa.<a class="footnote-ref" id="fnref:15" href="#fn:15"><sup>15</sup></a> New names were provided in both French and Latin for the benefit of an international readership. For a modern reader these dictionaries are still useful, but now to discover and understand older names, rather than the new. In the English version,<a class="footnote-ref" id="fnref:16" href="#fn:16"><sup>16</sup></a> the new names had been adapted to English, though they did not always align with current conventions. St. John used "acetat" instead of "acetate" for example. For gases, the word "gas" ("gaz") was being popularized by its consistent use in the new names, whereas the old names used the affix "air". </p> Louis-Bernard Guyton de MorveauAntoine LavoisierClaude Louis BertholletAntoine François de FourcroyThe authors of <i>Méthode de nomenclature chimique</i>. <h3><i>Traité élémentaire de chimie</i></h3> <p>The new system was presented to a wider audience in Lavoisier's 1789 textbook <i><a href="/facts/Trait%25C3%25A9_%25C3%2589l%25C3%25A9mentaire_de_Chimie/1ecYdJG8">Traité élémentaire de chimie</a></i>,<a class="footnote-ref" id="fnref:17" href="#fn:17"><sup>17</sup></a> translated into English as <i>Elements of Chemistry</i> by <a href="/facts/Robert_Kerr_(writer)/k7hgN8RM">Robert Kerr</a> in 1790,<a class="footnote-ref" id="fnref:18" href="#fn:18"><sup>18</sup></a> and it would be of great influence long after his death at the <a href="/facts/Guillotine/E6SUBNJF">guillotine</a> in 1794. The project was also endorsed by Swedish chemist <a href="/facts/J%25C3%25B6ns_Jakob_Berzelius/HakSv3sP">Jöns Jakob Berzelius</a>,<a class="footnote-ref" id="fnref:19" href="#fn:19"><sup>19</sup></a><a class="footnote-ref" id="fnref:20" href="#fn:20"><sup>20</sup></a> who adapted the ideas for the German-speaking world. </p><p><i>Traité élémentaire de chimie</i> included the first modern list of elements ("simple substances"). Also here were older names provided to explain their new counterparts.<a class="footnote-ref" id="fnref:21" href="#fn:21"><sup>21</sup></a> Some element names were new and received English versions similar to the French names.<a class="footnote-ref" id="fnref:22" href="#fn:22"><sup>22</sup></a> For the new "element" <i><a href="/facts/Caloric_theory/getpJK96">caloric</a></i>, both the new and some of the "old" names (<i>igneous fluid</i> and <i>matter of fire and of heat</i>) were coined by Lavoisier, their discoverer. Most element names, however, were not new, so they retained their existing English versions. But their status as elements was new—a product of the <a href="/facts/Chemical_revolution/ab4z8Tht">chemical revolution</a>. </p> <h3>Geneva Rules</h3> <p>The recommendations of Guyton were only for what would later be known as <a href="/facts/Inorganic_compound/TfFfzxSz">inorganic compounds</a>. With the massive expansion of <a href="/facts/Organic_chemistry/djxhxaNg">organic chemistry</a> during the mid-nineteenth century and the greater understanding of the structure of <a href="/facts/Organic_compound/gqCNaN45">organic compounds</a>, the need for a less <i>ad hoc</i> system of nomenclature was felt just as the theoretical basis became available to make this possible. An international conference was convened in Geneva in 1892 by the national chemical societies, from which the first widely accepted <a href="/facts/Geneva_Rules/omYff6Gy">proposals for standardization</a> developed.<a class="footnote-ref" id="fnref:23" href="#fn:23"><sup>23</sup></a> </p> <h3>IUPAC</h3> <p class="note">Main article: <a href="/facts/IUPAC_nomenclature_of_chemistry/pepvzNun">IUPAC nomenclature of chemistry</a></p> <p>A commission was established in 1913 by the Council of the International Association of Chemical Societies, but its work was interrupted by World War I. After the war, the task passed to the newly formed <a href="/facts/International_Union_of_Pure_and_Applied_Chemistry/2AV6myCK">International Union of Pure and Applied Chemistry</a>, which first appointed commissions for organic, inorganic, and <a href="/facts/Biochemistry/fa2pWEBp">biochemical</a> nomenclature in 1921 and continues to do so to this day. </p> <h2 id="types-of-nomenclature">Types of nomenclature</h2> <p>Nomenclature has been developed for both organic and inorganic chemistry. There are also designations having to do with structure – see <a href="/facts/Descriptor_(chemistry)/cPz4wDpX">Descriptor (chemistry)</a>. </p> <h3>Organic chemistry</h3> <p class="note">Main article: <a href="/facts/IUPAC_nomenclature_of_organic_chemistry/ElygYu14">IUPAC nomenclature of organic chemistry</a></p> <ul><li>Additive name</li> <li>Conjunctive name</li> <li>Functional class name, also known as a radicofunctional name</li> <li>Fusion name</li> <li><a href="/facts/Hantzsch%25E2%2580%2593Widman_nomenclature/JRr8Ua1x">Hantzsch–Widman nomenclature</a></li> <li>Multiplicative name</li> <li>Replacement name</li> <li>Substitutive name</li> <li>Subtractive name</li></ul> <h3>Inorganic chemistry</h3> <p class="note">Main article: <a href="/facts/IUPAC_nomenclature_of_inorganic_chemistry/nzfwwsdG">IUPAC nomenclature of inorganic chemistry</a></p> <h4>Compositional nomenclature</h4> <h5>Type-I ionic binary compounds</h5> <p>For type-I <a href="/facts/Ionic_compound/jB9nMfrE">ionic</a> <a href="/facts/Binary_compound/pQ7zq0Cv">binary compounds</a>, the <a href="/facts/Cation/wrbwhF3z">cation</a> (a <a href="/facts/Metal/pqQVs8QU">metal</a> in most cases) is named first, and the <a href="/facts/Anion/wrbwhF3z">anion</a> (usually a <a href="/facts/Nonmetal_(chemistry)/0oejKuzK">nonmetal</a>) is named second. The cation retains its elemental name (e.g., <i>iron</i> or <i>zinc</i>), but the suffix of the nonmetal changes to <i>-ide</i>. For example, the compound LiBr is made of Li+ cations and Br− anions; thus, it is called <a href="/facts/Lithium_bromide/YzaKEkwj">lithium bromide</a>. The compound BaO, which is composed of Ba2+ cations and O2− anions, is referred to as <a href="/facts/Barium_oxide/85GNJ93P">barium oxide</a>. </p><p>The <a href="/facts/Oxidation_state/W53W6s6V">oxidation state</a> of each element is unambiguous. When these ions combine into a type-I binary compound, their equal-but-opposite charges are neutralized, so the compound's net charge is zero. </p> <h5>Type-II ionic binary compounds</h5> <p>Type-II ionic binary compounds are those in which the cation does not have just one oxidation state. This is common among <a href="/facts/Transition_metal/0slGWoLQ">transition metals</a>. To name these compounds, one must determine the charge of the cation and then render the name as would be done with Type-I ionic compounds, except that a <a href="/facts/Roman_numeral/7BA8nn78">Roman numeral</a> (indicating the charge of the cation) is written in parentheses next to the cation name (this is sometimes referred to as <a href="/facts/Stock_nomenclature/FbrV1lmQ">Stock nomenclature</a>). For example, for the compound FeCl3, the cation, <a href="/facts/Iron/DkICCKIC">iron</a>, can occur as Fe2+ and Fe3+. In order for the compound to have a net charge of zero, the cation must be Fe3+ so that the three Cl− anions can be balanced (3+ and 3− balance to 0). Thus, this compound is termed <a href="/facts/Iron(III)_chloride/a51pulq1">iron(III) chloride</a>. Another example could be the compound PbS2. Because the S2− anion has a subscript of 2 in the formula (giving a 4− charge), the compound must be balanced with a 4+ charge on the Pb cation (<a href="/facts/Lead/EYljasJN">lead</a> can form cations with a 4+ or a 2+ charge). Thus, the compound is made of one Pb4+ cation to every two S2− anions, the compound is balanced, and its name is written as <a href="/facts/Lead(IV)_sulfide/cor4p9PL">lead(IV) sulfide</a>. </p><p>An older system – relying on Latin names for the elements – is also sometimes used to name Type-II ionic binary compounds. In this system, the metal (instead of a Roman numeral next to it) has a suffix "-ic" or "-ous" added to it to indicate its oxidation state ("-ous" for lower, "-ic" for higher). For example, the compound FeO contains the Fe2+ cation (which balances out with the O2− anion). Since this oxidation state is lower than the other possibility (Fe3+), this compound is sometimes called <a href="/facts/Iron(II)_oxide/H9V7S3MG">ferrous oxide</a>. For the compound, SnO2, the tin ion is Sn4+ (balancing out the 4− charge on the two O2− anions), and because this is a higher oxidation state than the alternative (Sn2+), this compound is termed <a href="/facts/Tin_dioxide/tLGukNFB">stannic oxide</a>. </p><p>Some ionic compounds contain <a href="/facts/Polyatomic_ion/FcPWAyLm">polyatomic ions</a>, which are charged entities containing two or more covalently bonded types of atoms. It is important to know the names of common polyatomic ions; these include: </p> <ul><li><a href="/facts/Ammonium/jYm8wc1n">ammonium</a> (NH+4)</li> <li><a href="/facts/Nitrite/qkz2XScK">nitrite</a> (NO−2)</li> <li><a href="/facts/Nitrate/5AnVlYnL">nitrate</a> (NO−3)</li> <li><a href="/facts/Sulfite/xdppUlKA">sulfite</a> (SO2−3)</li> <li><a href="/facts/Sulfate/yuWVxsUf">sulfate</a> (SO2−4)</li> <li><a href="/facts/Sulfate/yuWVxsUf">hydrogen sulfate</a> (bisulfate) (HSO−4)</li> <li><a href="/facts/Hydroxide/zW0wxpWD">hydroxide</a> (OH−)</li> <li><a href="/facts/Cyanide/t0o8FMKI">cyanide</a> (CN−)</li> <li><a href="/facts/Phosphate/FDGVCxUG">phosphate</a> (PO3−4)</li> <li><a href="/facts/Phosphate/FDGVCxUG">hydrogen phosphate</a> (HPO2−4)</li> <li><a href="/facts/Phosphate/FDGVCxUG">dihydrogen phosphate</a> (H2PO−4)</li> <li><a href="/facts/Carbonate/FES1QHkN">carbonate</a> (CO2−3)</li> <li><a href="/facts/Bicarbonate/zzSVVAl1">hydrogen carbonate</a> (bicarbonate) (HCO−3)</li> <li><a href="/facts/Hypochlorite/XMJdjAEM">hypochlorite</a> (ClO−)</li> <li><a href="/facts/Chlorite/EYtQI4wC">chlorite</a> (ClO−2)</li> <li><a href="/facts/Chlorate/Ypne0mrY">chlorate</a> (ClO−3)</li> <li><a href="/facts/Perchlorate/WCC53zS2">perchlorate</a> (ClO−4)</li> <li><a href="/facts/Acetate/U90VVczy">acetate</a> (C2H3O−2)</li> <li><a href="/facts/Permanganate/nJa04jVh">permanganate</a> (MnO−4)</li> <li><a href="/facts/Dichromate/6xkFLIJw">dichromate</a> (Cr2O2−7)</li> <li><a href="/facts/Monochromate/6xkFLIJw">chromate</a> (CrO2−4)</li> <li><a href="/facts/Peroxide/VMU8y4xB">peroxide</a> (O2−2)</li> <li><a href="/facts/Superoxide/2X2sQocn">superoxide</a> (O−2)</li> <li><a href="/facts/Oxalate/u0Gdem0A">oxalate</a> (C2O2−4)</li> <li><a href="/facts/Hydrogen_oxalate/GNG4pAxP">hydrogen oxalate</a> (HC2O−4)</li></ul> <p>The formula Na2SO3 denotes that the cation is <a href="/facts/Sodium/eYuSPu2V">sodium</a>, or Na+, and that the anion is the sulfite ion (SO2−3). Therefore, this compound is named <a href="/facts/Sodium_sulfite/gaj3QRU7">sodium sulfite</a>. If the given formula is Ca(OH)2, it can be seen that OH− is the hydroxide ion. Since the charge on the calcium ion is 2+, it makes sense there must be two OH− ions to balance the charge. Therefore, the name of the compound is <a href="/facts/Calcium_hydroxide/Kz2KzRd8">calcium hydroxide</a>. If one is asked to write the formula for copper(I) chromate, the Roman numeral indicates that copper ion is Cu+ and one can identify that the compound contains the chromate ion (CrO2−4). Two of the 1+ copper ions are needed to balance the charge of one 2− chromate ion, so the formula is Cu2CrO4. </p> <h5>Type-III binary compounds</h5> <p>Type-III binary compounds are <a href="/facts/Covalent_bond/EzMLf3Pz">bonded covalently</a>. Covalent bonding occurs between nonmetal elements. Compounds bonded covalently are also known as <i><a href="/facts/Molecule/N9ljSfFq">molecules</a></i>. For the compound, the first element is named first and with its full elemental name. The second element is named as if it were an anion (base name of the element + <i>-ide</i> suffix). Then, prefixes are used to indicate the numbers of each atom present: these prefixes are <i>mono-</i> (one), <i>di-</i> (two), <i>tri-</i> (three), <i>tetra-</i> (four), <i>penta-</i> (five), <i>hexa-</i> (six), <i>hepta-</i> (seven), <i>octa-</i> (eight), <i>nona-</i> (nine), and <i>deca-</i> (ten). The prefix <i>mono-</i> is never used with the first element. Thus, NCl3 is termed <a href="/facts/Nitrogen_trichloride/eC2URITS">nitrogen trichloride</a>, BF3 is termed <a href="/facts/Boron_trifluoride/2qa0NIH8">boron trifluoride</a>, and P2O5 is termed <a href="/facts/Diphosphorus_pentoxide/GKTSUNqS">diphosphorus pentoxide</a> (although the <i>a</i> of the prefix <i>penta-</i> should actually not be omitted before a vowel: the IUPAC Red Book 2005 page 69 states, "The final vowels of multiplicative prefixes should not be elided (although "monoxide", rather than "monooxide", is an allowed exception because of general usage)."). </p><p><a href="/facts/Carbon_dioxide/xGzpppEp">Carbon dioxide</a> is written CO2; <a href="/facts/Sulfur_tetrafluoride/jJYpjeSQ">sulfur tetrafluoride</a> is written SF4. A few compounds, however, have common names that prevail. H2O, for example, is usually termed <i><a href="/facts/Water/0lkXnJPK">water</a></i> rather than <i><a href="/facts/Dihydrogen_monoxide/nuJUf4RY">dihydrogen monoxide</a></i>, and NH3 is preferentially termed <i><a href="/facts/Ammonia/MtLtJFtz">ammonia</a></i> rather than <i>nitrogen trihydride</i>. </p> <h4>Substitutive nomenclature</h4> <p>This naming method generally follows established IUPAC organic nomenclature. <a href="/facts/Hydride/v2rlBGMg">Hydrides</a> of the main group elements (groups 13–17) are given the base name ending with <i>-ane</i>, e.g. <a href="/facts/Borane/pHQMPw5r">borane</a> (<a href="/facts/Boron/Pmwgd7Mf">B</a><a href="/facts/Hydrogen/BoYHjl0J">H</a>3), <a href="/facts/Oxidane/FFsl65l1">oxidane</a> (<a href="/facts/Hydrogen/BoYHjl0J">H</a>2<a href="/facts/Oxygen/acyn6o8r">O</a>), <a href="/facts/Phosphane/aYysn5TS">phosphane</a> (<a href="/facts/Phosphorus/27xCeIqs">P</a><a href="/facts/Hydrogen/BoYHjl0J">H</a>3) (Although the name <i><a href="/facts/Phosphine/aYysn5TS">phosphine</a></i> is also in common use, it is not recommended by IUPAC). The compound <a href="/facts/Phosphorus/27xCeIqs">P</a><a href="/facts/Chlorine/y27UwYBM">Cl</a>3 would thus be named substitutively as trichlorophosphane (with chlorine "substituting"). However, not all such names (or stems) are derived from the element name. For example, <a href="/facts/Nitrogen/Nf1QpGDz">N</a><a href="/facts/Hydrogen/BoYHjl0J">H</a>3 is termed "<a href="/facts/Azane/hRSo5EbY">azane</a>". </p> <h4>Additive nomenclature</h4> <p>This method of naming has been developed principally for coordination compounds although it can be applied more widely. An example of its application is [CoCl(NH3)5]Cl2, pentaamminechloridocobalt(III) chloride. </p><p><a href="/facts/Ligand/6etB3qeW">Ligands</a>, too, have a special naming convention. Whereas <i>chloride</i> becomes the prefix <i>chloro-</i> in substitutive naming, for a ligand it becomes <i>chlorido-</i>. </p> <h2 id="see-also">See also</h2> <ul><li><a href="/facts/Descriptor_(chemistry)/cPz4wDpX">Descriptor (chemistry)</a></li> <li><a href="/facts/International_Chemical_Identifier/6yR96JYR">International Chemical Identifier</a></li> <li><a href="/facts/IUPAC_nomenclature_for_organic_chemical_transformations/cR2LDESm">IUPAC nomenclature for organic chemical transformations</a></li> <li><a href="/facts/IUPAC_nomenclature_of_inorganic_chemistry_2005/U8kQ8dXk">IUPAC nomenclature of inorganic chemistry 2005</a></li> <li><a href="/facts/IUPAC_nomenclature_of_organic_chemistry/ElygYu14">IUPAC nomenclature of organic chemistry</a></li> <li><a href="/facts/IUPAC_numerical_multiplier/DMW4dRNS">IUPAC numerical multiplier</a></li> <li><a href="/facts/List_of_chemical_compounds_with_unusual_names/D4DRvucb">List of chemical compounds with unusual names</a></li> <li><a href="/facts/Preferred_IUPAC_name/qIDqTvoI">Preferred IUPAC name</a></li></ul> <h2 id="external-links">External links</h2> <ul><li>Interactive <a href="https://goldbook.iupac.org/">IUPAC Compendium of Chemical Terminology</a> (interactive "Gold Book")</li> <li><a href="https://old.iupac.org/publications/books/seriestitles/nomenclature.html">IUPAC Nomenclature Books Series</a> (list of all IUPAC nomenclature books, and means of accessing them)</li> <li><a href="https://web.archive.org/web/20051212164525/http://www.iupac.org/publications/compendium/index.html">IUPAC Compendium of Chemical Terminology</a> ("<i>Gold Book</i>") (archived 2005)</li> <li><a href="https://old.iupac.org/publications/books/gbook/index.html">Quantities, Units and Symbols in Physical Chemistry</a> ("<i>Green Book</i>")</li> <li><a href="https://www.acdlabs.com/resources/iupac-blue-book/">IUPAC Nomenclature of Organic Chemistry</a> ("<i>Blue Book</i>")</li> <li><a href="https://old.iupac.org/publications/books/author/connelly.html">Nomenclature of Inorganic Chemistry IUPAC Recommendations 2005</a> ("<i>Red Book</i>")</li> <li><a href="http://www.chem.qmul.ac.uk/iupac/">IUPAC Recommendations on Organic & Biochemical Nomenclature, Symbols, Terminology, etc.</a> (includes IUBMB Recommendations for biochemistry)</li> <li><a href="http://www.chemicalize.org/">chemicalize.org</a> A free web site/service that extracts IUPAC names from web pages and annotates a "chemicalized" version with structure images. Structures from annotated pages can also be searched.</li> <li><a href="https://web.archive.org/web/20101124182810/http://www.chemaxon.com/products/name-to-structure/">ChemAxon Name <> Structure</a> – IUPAC (& traditional) name to structure and structure to IUPAC name software. As used at <a href="http://www.chemicalize.org/">chemicalize.org</a></li> <li><a href="https://www.acdlabs.com/products/name/">ACD/Name</a> – Generates IUPAC, INDEX (CAS), InChi, Smiles, etc. for drawn structures in 10 languages and translates names to structures. Also available as batch tool and for Pipeline Pilot. Part of <a href="https://web.archive.org/web/20110808144233/http://ilab.acdlabs.com/iLab2/">I-Lab 2.0</a></li></ul> <h2 id="references">References</h2> <ol> <li id="fn:1"><p>"1958 (A: Hydrocarbons, and B: Fundamental Heterocyclic Systems), 1965 (C: Characteristic Groups)", Nomenclature of Organic Chemistry (3rd ed.), London: Butterworths, 1971, ISBN 978-0-408-70144-0. <a href="978-0-408-70144-0" target="_blank">978-0-408-70144-0</a> <a href="#fnref:1" class="footnote-back-ref">↩</a></p></li> <li id="fn:2"><p>Rigaudy, J.; Klesney, S. P., eds. (1979). Nomenclature of Organic Chemistry. IUPAC/Pergamon Press. ISBN 0-08022-3699.. Panico, R.; Powell, W. H.; Richer, J. C., eds. (1993). A Guide to IUPAC Nomenclature of Organic Compounds. IUPAC/Blackwell Science. ISBN 0-632-03488-2.. IUPAC, Chemical Nomenclature and Structure Representation Division (27 October 2004). Nomenclature of Organic Chemistry (Provisional Recommendations). IUPAC. <a href="0-08022-36990-632-03488-2" target="_blank">0-08022-36990-632-03488-2</a> <a href="#fnref:2" class="footnote-back-ref">↩</a></p></li> <li id="fn:3"><p>International Union of Pure and Applied Chemistry (2005). Nomenclature of Inorganic Chemistry (IUPAC Recommendations 2005). Cambridge (UK): RSC–IUPAC. ISBN 0-85404-438-8. Electronic version.. <a href="/wiki/International_Union_of_Pure_and_Applied_Chemistry" target="_blank">/wiki/International_Union_of_Pure_and_Applied_Chemistry</a> <a href="#fnref:3" class="footnote-back-ref">↩</a></p></li> <li id="fn:4"><p>International Union of Pure and Applied Chemistry (1993). Quantities, Units and Symbols in Physical Chemistry, 2nd edition, Oxford: Blackwell Science. ISBN 0-632-03583-8. Electronic version.. <a href="/wiki/International_Union_of_Pure_and_Applied_Chemistry" target="_blank">/wiki/International_Union_of_Pure_and_Applied_Chemistry</a> <a href="#fnref:4" class="footnote-back-ref">↩</a></p></li> <li id="fn:5"><p>Compendium of Chemical Terminology, IMPACT Recommendations (2nd Ed.), Oxford:Blackwell Scientific Publications. (1997) <a href="#fnref:5" class="footnote-back-ref">↩</a></p></li> <li id="fn:6"><p>Biochemical Nomenclature and Related Documents, London: Portland Press, 1992. <a href="#fnref:6" class="footnote-back-ref">↩</a></p></li> <li id="fn:7"><p>International Union of Pure and Applied Chemistry (1998). Compendium of Analytical Nomenclature (definitive rules 1997, 3rd. ed.). Oxford: Blackwell Science. ISBN 0-86542-6155. <a href="/wiki/International_Union_of_Pure_and_Applied_Chemistry" target="_blank">/wiki/International_Union_of_Pure_and_Applied_Chemistry</a> <a href="#fnref:7" class="footnote-back-ref">↩</a></p></li> <li id="fn:8"><p>Compendium of Macromolecular Nomenclature, Oxford: Blackwell Scientific Publications, 1991. <a href="#fnref:8" class="footnote-back-ref">↩</a></p></li> <li id="fn:9"><p>Compendium of Terminology and Nomenclature of Properties in Clinical Laboratory Sciences, IMPACT Recommendations 1995, Oxford: Blackwell Science, 1995, ISBN 978-0-86542-612-2. <a href="978-0-86542-612-2" target="_blank">978-0-86542-612-2</a> <a href="#fnref:9" class="footnote-back-ref">↩</a></p></li> <li id="fn:10"><p>Guyton de Morveau, L. B. (1782), "Mémoire sur les dénominations chimiques, la necessité d'en perfectionner le système et les règles pour y parvenir", Observations Sur la Physique, 19: 370–382 <a href="/wiki/Louis-Bernard_Guyton_de_Morveau" target="_blank">/wiki/Louis-Bernard_Guyton_de_Morveau</a> <a href="#fnref:10" class="footnote-back-ref">↩</a></p></li> <li id="fn:11"><p>Guyton de Morveau, L. B.; Lavoisier, A. L.; Berthollet, C. L.; Fourcroy, A. F. de (1787), Méthode de Nomenclature Chimique, Paris: Cuchet <a href="/wiki/Louis-Bernard_Guyton_de_Morveau" target="_blank">/wiki/Louis-Bernard_Guyton_de_Morveau</a> <a href="#fnref:11" class="footnote-back-ref">↩</a></p></li> <li id="fn:12"><p>Guyton de Morveau, L. B.; Lavoisier, A.; Berthollet, C. L.; Fourcroy, A.-F. de (1788) [1787]. Method of chymical nomenclature, proposed by Messrs. de Morveau, Lavoisier, Bertholet, and de Fourcroy: To which is added A new system of chymical characters adapted to the nomenclature by Mess. Hassenfratz and Adet. Translated by St. John, James. G. Kearsley. <a href="https://archive.org/details/bim_eighteenth-century_methode-du-nomenclature_guyton-de-morveau-louis_1788/page/n2/mode/1up" target="_blank">https://archive.org/details/bim_eighteenth-century_methode-du-nomenclature_guyton-de-morveau-louis_1788/page/n2/mode/1up</a> <a href="#fnref:12" class="footnote-back-ref">↩</a></p></li> <li id="fn:13"><p>Giunta, C. "A Dictionary of the New Chymical Nomenclature". Classic Chemistry. <a href="https://web.lemoyne.edu/~giunta/nomenclature.html" target="_blank">https://web.lemoyne.edu/~giunta/nomenclature.html</a> <a href="#fnref:13" class="footnote-back-ref">↩</a></p></li> <li id="fn:14"><p>Guyton de Morveau et al. 1787, p. 107. - Guyton de Morveau, L. B.; Lavoisier, A. L.; Berthollet, C. L.; Fourcroy, A. F. de (1787), Méthode de Nomenclature Chimique, Paris: Cuchet <a href="https://archive.org/details/b2803806x/page/n7/mode/2up" target="_blank">https://archive.org/details/b2803806x/page/n7/mode/2up</a> <a href="#fnref:14" class="footnote-back-ref">↩</a></p></li> <li id="fn:15"><p>Guyton de Morveau et al. 1787, p. 144. - Guyton de Morveau, L. B.; Lavoisier, A. L.; Berthollet, C. L.; Fourcroy, A. F. de (1787), Méthode de Nomenclature Chimique, Paris: Cuchet <a href="https://archive.org/details/b2803806x/page/n7/mode/2up" target="_blank">https://archive.org/details/b2803806x/page/n7/mode/2up</a> <a href="#fnref:15" class="footnote-back-ref">↩</a></p></li> <li id="fn:16"><p>Guyton de Morveau et al. 1788, p. 81. - Guyton de Morveau, L. B.; Lavoisier, A.; Berthollet, C. L.; Fourcroy, A.-F. de (1788) [1787]. Method of chymical nomenclature, proposed by Messrs. de Morveau, Lavoisier, Bertholet, and de Fourcroy: To which is added A new system of chymical characters adapted to the nomenclature by Mess. Hassenfratz and Adet. Translated by St. John, James. G. Kearsley. <a href="https://archive.org/details/bim_eighteenth-century_methode-du-nomenclature_guyton-de-morveau-louis_1788/page/n2/mode/1up" target="_blank">https://archive.org/details/bim_eighteenth-century_methode-du-nomenclature_guyton-de-morveau-louis_1788/page/n2/mode/1up</a> <a href="#fnref:16" class="footnote-back-ref">↩</a></p></li> <li id="fn:17"><p>Lavoisier, A. L. (1789), Traité Élémentaire de Chimie, Paris: Deterville <a href="/wiki/Antoine_Lavoisier" target="_blank">/wiki/Antoine_Lavoisier</a> <a href="#fnref:17" class="footnote-back-ref">↩</a></p></li> <li id="fn:18"><p>Lavoisier, A. (1790) [1789]. Elements of Chemistry, in a New Systematic Order, Containing All the Modern Discoveries. Translated by Kerr, Robert. William Creech. <a href="https://www.gutenberg.org/cache/epub/30775/pg30775-images.html" target="_blank">https://www.gutenberg.org/cache/epub/30775/pg30775-images.html</a> <a href="#fnref:18" class="footnote-back-ref">↩</a></p></li> <li id="fn:19"><p>Berzelius, J. J. (1811), "Essai sur la nomenclature chimique", Journal de Physique, 73: 253–286. <a href="/wiki/J%C3%B6ns_Jakob_Berzelius" target="_blank">/wiki/J%C3%B6ns_Jakob_Berzelius</a> <a href="#fnref:19" class="footnote-back-ref">↩</a></p></li> <li id="fn:20"><p>Wisniak, Jaime (2000), "Jöns Jacob Berzelius A Guide to the Perplexed Chemist", The Chemical Educator, 5 (6): 343–50, doi:10.1007/s00897000430a, S2CID 98774420. <a href="/wiki/Doi_(identifier)" target="_blank">/wiki/Doi_(identifier)</a> <a href="#fnref:20" class="footnote-back-ref">↩</a></p></li> <li id="fn:21"><p>Lavoisier 1789, p. 192. - Lavoisier, A. L. (1789), Traité Élémentaire de Chimie, Paris: Deterville <a href="https://archive.org/details/traitlmentairede01lavo/page/n7/mode/2up" target="_blank">https://archive.org/details/traitlmentairede01lavo/page/n7/mode/2up</a> <a href="#fnref:21" class="footnote-back-ref">↩</a></p></li> <li id="fn:22"><p>Lavoisier 1790, p. 175. - Lavoisier, A. (1790) [1789]. Elements of Chemistry, in a New Systematic Order, Containing All the Modern Discoveries. Translated by Kerr, Robert. William Creech. <a href="https://www.gutenberg.org/cache/epub/30775/pg30775-images.html" target="_blank">https://www.gutenberg.org/cache/epub/30775/pg30775-images.html</a> <a href="#fnref:22" class="footnote-back-ref">↩</a></p></li> <li id="fn:23"><p>"Congrès de nomenclature chimique, Genève 1892", Bulletin de la Société Chimique de Paris, Série 3, 8: xiii–xxiv, 1892. <a href="https://gallica.bnf.fr/ark:/12148/bpt6k2820064.image" target="_blank">https://gallica.bnf.fr/ark:/12148/bpt6k2820064.image</a> <a href="#fnref:23" class="footnote-back-ref">↩</a></p></li> </ol>