Brooktree

<h2 id="history">History</h2>
<h3>Background</h3>
<p>Computer graphics are represented by a series of numbers held in memory. These numbers represent a color to be displayed on the screen in a particular location, a <i>pixel</i>. The process of turning the number into the analog signal for display requires the use of a <a href="/facts/Digital-to-analog_convertor/5loEvAeb">digital-to-analog convertor</a> (DAC), which, in the early 1980s, was normally being handled by custom hardware on the <a href="/facts/Graphics_card/bcKfPyFt">graphics card</a> that required several separate components. In typical examples, the system had the ability to generate colors from a pallet that might be 8 to 24-bits, but due to the limited amount of <a href="/facts/Main_memory/wPHKFpdx">main memory</a>, normally stored 1 to 8-bit values for any given pixel. Each of the possible stored values was converted to a particular set of <a href="/facts/RGB/3Be0zwCj">RGB</a> output values using a "color lookup table", or "LUT" (sometimes "CLUT").<a class="footnote-ref" id="fnref:2" href="#fn:2"><sup>2</sup></a>
</p>
<h3>LUT chips</h3>
<p>Henry Sour Katzenstein was living in <a href="/facts/Los_Angeles/pyXpYEX9">Los Angeles</a> in 1981 when he developed the idea for an entirely new way to produce a DAC. The limitation on existing systems was the switching speed, which was a function of the need to switch from 1 to 0 or back while producing enough voltage to drive the DAC to the levels needed by the display. This was normally accomplished using a color mapping chip and then separate amplifiers. Given the existing <a href="/facts/Semiconductor_fabrication/Jd23Mu1z">semiconductor fabrication</a> (fab) systems of the era, this limited most systems to about 25 MHz or less, which was enough for displays running around 640 pixels horizontally. Moreover, the rapid switching of the relatively high-power outputs that resulted generated noise on the <a href="/facts/Power_supply/4A8zBRHn">power supply</a> that often came through in the signal and on the <a href="/facts/Motherboard/GXB10heG">motherboard</a>.<a class="footnote-ref" id="fnref:3" href="#fn:3"><sup>3</sup></a>
</p><p>Katzenstein's concept was to produce output based on current levels, not voltage, and to control that current by mixing two current sources, positive and negative. This meant that the incoming power was always "full on" and only the outputs varied, eliminating the switching noise. Current-controlled circuitry was well developed in the analog market, and high-speed current switches were easy to fab. The downside to this approach was that the resulting IC was always drawing full power, which dissipated as heat, and the ICs ran extremely hot.<a class="footnote-ref" id="fnref:4" href="#fn:4"><sup>4</sup></a><a class="footnote-ref" id="fnref:5" href="#fn:5"><sup>5</sup></a>
</p><p>The basic concept was developed enough by 1983 that he formed Brooktree, named after a street he formerly lived on in <a href="/facts/San_Diego/YFUP7gB9">San Diego</a>, using <a href="/facts/Venture_capital/yeH3m7zo">venture capital</a> funding. The videoDAC was put on the market in 1985. Running at 75 MHz, about four times the speed of most contemporary systems, it could drive a display up to 2,048 pixels wide at 60 fps. Although mass production did not begin until 1988, when <a href="/facts/Computer_monitor/NRaTDFHc">computer monitors</a> with this sort of resolution began to appear, the design quickly began to steal market share from companies like <a href="/facts/AMD/CB1G7QTb">AMD</a>, <a href="/facts/Analog_Devices/xWFzrkre">Analog Devices</a> and <a href="/facts/Texas_Instruments/88NUhuHF">Texas Instruments</a>. Large customers included <a href="/facts/Apple_Computer/oTJYta3k">Apple Computer</a>, <a href="/facts/Sun_Microsystems/VJ9EzEFd">Sun Microsystems</a>, <a href="/facts/Toshiba/QHRaw8Tr">Toshiba</a> and <a href="/facts/IBM/QszA7nwd">IBM</a>.<a class="footnote-ref" id="fnref:6" href="#fn:6"><sup>6</sup></a>
</p><p>The company's next product was a similar design with one key difference, the mapping from the input values to output was no longer through a fixed table, but one that could be written to. This meant that "color 100" could be green for one program, and blue for another, with the output RGB levels stored as an 18- or 24-bit value in <a href="/facts/Random_access_memory/DuD4bxh6">RAM</a>. The result, known to the company as a RAMDAC but more commonly known today generically as a LUT-DAC, gave the system much greater flexibility. While successful for a time, it was not long before the relentless improvements in fabrication allowed companies to incorporate the LUT-DAC into the same IC as the rest of the controller logic, and Brooktree's line of separate ICs began to wane.<a class="footnote-ref" id="fnref:7" href="#fn:7"><sup>7</sup></a>
</p>
<h3>Video capture</h3>
<p>Brooktree turned its attention from the LUT market to video capture, introducing the Bt848 in the early 1990s. This became very popular in video capture boards for <a href="/facts/Personal_computer/koaYfNce">personal computers</a>, <a href="/facts/Digital_video/xsn9omqG">digital video</a> cameras and similar devices. One version also included the ability to capture and decode <a href="/facts/Teletext/Jog0HW8t">teletext</a> information for use in Europe. The Bt878 followed, adding audio decoders as well, including <a href="/facts/FM_radio/TpKl3FJv">FM radio</a>, reducing the number of chips needed to produce a complete television decoder. The audio could be converted to 8-bit or 16-bit values at 44,800 samples per second, the equivalent of <a href="/facts/CD_audio/FDMqNLw5">CD audio</a>.
</p><p>The company was purchased by Rockwell during this period, and they later spun out their semiconductor division as Conexant. Conexant shipped one final version of the line, the Conexant Fusion 878A. The major addition to the Fusion is an <a href="/facts/MPEG2/SpuH5FJu">MPEG2</a> decoder, which allows it to receive <a href="/facts/ATSC_standards/RIYWmB7v">ATSC digital video</a> in addition to the earlier analog formats. In order to make the adoption as simple as possible, the digital audio pins from the Bt878 were used as the ATSC inputs in the Fusion. As ATSC carries both digital video and audio, nothing is lost when using these for digital video.
</p>
<h2 id="notes">Notes</h2>

<h2 id="see-also">See also</h2>
<ul><li><a href="/facts/Video_capture_card/D4HgJ7As">Video capture card</a></li>
<li><a href="/facts/Hauppauge_Computer_Works/bQzMvC7R">Hauppauge Computer Works</a></li></ul>

<h3>Bibliography</h3>
<ul><li>Peddie, Jon (2023). <i>The History of the GPU - Steps to Invention</i>. Springer Nature.</li></ul>

<h2 id="references">References</h2>

<ol>
<li id="fn:1"><p>"Chipdir". 080507 xs4all.nl Archived 2008-01-04 at the Wayback Machine <a href="http://www.xs4all.nl/~ganswijk/chipdir/c/b.htm" target="_blank">http://www.xs4all.nl/~ganswijk/chipdir/c/b.htm</a> <a href="#fnref:1" class="footnote-back-ref">↩</a></p></li>
<li id="fn:2"><p>Peddie 2023, p. 103. - Peddie, Jon (2023). The History of the GPU - Steps to Invention. Springer Nature. <a href="#fnref:2" class="footnote-back-ref">↩</a></p></li>
<li id="fn:3"><p>Peddie 2023, p. 103. - Peddie, Jon (2023). The History of the GPU - Steps to Invention. Springer Nature. <a href="#fnref:3" class="footnote-back-ref">↩</a></p></li>
<li id="fn:4"><p>Peddie 2023, p. 103. - Peddie, Jon (2023). The History of the GPU - Steps to Invention. Springer Nature. <a href="#fnref:4" class="footnote-back-ref">↩</a></p></li>
<li id="fn:5"><p>Hot enough to burn you.[2] <a href="#fnref:5" class="footnote-back-ref">↩</a></p></li>
<li id="fn:6"><p>Peddie 2023, p. 103. - Peddie, Jon (2023). The History of the GPU - Steps to Invention. Springer Nature. <a href="#fnref:6" class="footnote-back-ref">↩</a></p></li>
<li id="fn:7"><p>Peddie 2023, p. 104. - Peddie, Jon (2023). The History of the GPU - Steps to Invention. Springer Nature. <a href="#fnref:7" class="footnote-back-ref">↩</a></p></li>
</ol>

Brooktree open-in-new

Brooktree