Surface tension

Surface tension is the tendency of <a href="/facts/Liquid/t9GkLWzt">liquid</a> surfaces at rest to shrink into the minimum <a href="/facts/Surface_area/WNowzFCw">surface area</a> possible. Surface <a href="/facts/Tension_(physics)/waNGYp3a">tension</a> is what allows objects with a higher density than water such as <a href="/facts/Razor_blade/1DqYPww9">razor blades</a> and insects (e.g. <a href="/facts/Gerridae/c58XA5xm">water striders</a>) to float on a water surface without becoming even partly submerged.
At liquid–air interfaces, surface tension results from the greater attraction of liquid molecules to each other (due to <a href="/facts/Cohesion_(chemistry)/cthgtKKj">cohesion</a>) than to the molecules in the air (due to <a href="/facts/Adhesion/NuVQPk4z">adhesion</a>).
There are two primary mechanisms in play. One is an inward force on the surface molecules causing the liquid to contract. Second is a tangential force parallel to the surface of the liquid. This tangential force is generally referred to as the surface tension. The net effect is the liquid behaves as if its surface were covered with a stretched elastic membrane. But this analogy must not be taken too far as the tension in an elastic membrane is dependent on the amount of deformation of the membrane while surface tension is an inherent property of the liquid–air or liquid–vapour interface.
Because of the relatively high attraction of water molecules to each other through a web of <a href="/facts/Hydrogen_bond/85V86IIg">hydrogen bonds</a>, water has a higher surface tension (72.8 <a href="/facts/Millinewton/Ral9XgNl">millinewtons</a> (mN) per meter at 20 °C) than most other liquids. Surface tension is an important factor in the phenomenon of <a href="/facts/Capillary_action/aa60yQ32">capillarity</a>.
Surface tension has the <a href="/facts/Dimensional_analysis/t6UskoCD">dimension</a> of <a href="/facts/Force/LNAUWMwK">force</a> per unit <a href="/facts/Length/EwFyAqGH">length</a>, or of <a href="/facts/Energy/wd8PrQM7">energy</a> per unit <a href="/facts/Area/KsNG1G9t">area</a>. The two are equivalent, but when referring to energy per unit of area, it is common to use the term <a href="/facts/Surface_energy/FYQruNIK">surface energy</a>, which is a more general term in the sense that it applies also to <a href="/facts/Solid/YU0hJq6f">solids</a>.
In <a href="/facts/Materials_science/N5HrXRYW">materials science</a>, surface tension is used for either <a href="/facts/Surface_stress/I5ksvwWB">surface stress</a> or <a href="/facts/Surface_energy/FYQruNIK">surface energy</a>.

Surface tension open-in-new

Surface tension