Ground glass joint

Ground glass joints are used in laboratories to quickly and easily fit leak-tight apparatus together from interchangeable commonly available parts. For example, a <a href="/facts/Round_bottom_flask/LKnL9pFq">round bottom flask</a>, <a href="/facts/Liebig_condenser/qoo0vtM3">Liebig condenser</a>, and <a href="/facts/Oil_bubbler/H7pnld84">oil bubbler</a> with ground glass joints may be rapidly fitted together to <a href="/facts/Reflux/Elav2kgM">reflux</a> a reaction mixture. This is a large improvement compared with older methods of custom-made glassware, which was time-consuming and expensive, or the use of less chemical resistant and heat resistant <a href="/facts/Cork_(material)/GFsWrA8a">corks</a> or <a href="/facts/Rubber_bung/nvvfcYGP">rubber bungs</a> and glass tubes as joints, which took time to prepare as well.
One of the glassware items to be joined would have an inner (or male) joint with the ground glass surface facing outward and the other would have an outer (or female) joint of a correspondingly fitting taper with the <a href="/facts/Ground_glass/dbceXmJo">ground glass</a> surface facing inward. To connect the hollow inner spaces of the glassware components, ground glass joints are hollow on the inside and open at the ends, except for stoppers.

Ground glass joint open-in-new

Ground glass joint