Whisker (metallurgy)

<p>Metal whiskering is a phenomenon that occurs in electrical devices when metals form long whisker-like projections over time. <a href="/facts/Tin/obW9mqc3">Tin</a> whiskers were noticed and documented in the <a href="/facts/Vacuum_tube/VHd1BNLq">vacuum tube</a> era of electronics early in the 20th century in equipment that used pure, or almost pure, tin solder in their production. It was noticed that small metal hairs or tendrils grew between metal solder pads, causing <a href="/facts/Short_circuit/r09vaaeQ">short circuits</a>. Metal whiskers form in the presence of compressive stress. <a href="/facts/Germanium/wtoALHGs">Germanium</a>, <a href="/facts/Zinc/80b1qgk3">zinc</a>, <a href="/facts/Cadmium/wXkV2eIX">cadmium</a>, and even <a href="/facts/Lead/EYljasJN">lead</a> whiskers have been documented. Many techniques are used to mitigate the problem, including changes to the <a href="/facts/Annealing_(metallurgy)/2AfoCE4X">annealing</a> process (heating and cooling), the addition of elements like copper and nickel, and the inclusion of <a href="/facts/Conformal_coating/3RXpv617">conformal coatings</a>. Traditionally, lead has been added to slow down whisker growth in tin-based solders.
</p><p>Following the <a href="/facts/RoHS/VbhtCJ1k">Restriction of Hazardous Substances Directive</a> (RoHS), the <a href="/facts/European_Union/6GYcR8qM">European Union</a> banned the use of lead in most consumer electronic products from 2006 due to health problems associated with lead and the "high-tech trash" problem, leading to a re-focusing on the issue of whisker formation in <a href="/facts/Lead-free_solder/GBvJH75t">lead-free solders</a>.
</p>

Whisker (metallurgy) open-in-new

Whisker (metallurgy)