Programmable Universal Machine for Assembly

The PUMA (Programmable Universal Machine for Assembly, or Programmable Universal Manipulation Arm) is an <a href="/facts/Industrial_robot/fzf73DVv">industrial</a> <a href="/facts/Robotic_arm/hGezrM9c">robotic arm</a> developed by <a href="/facts/Victor_Scheinman/LgVmzapa">Victor Scheinman</a> at pioneering <a href="/facts/Robot/S5mDzWYk">robot</a> company <a href="/facts/Unimation/8CHoN0hh">Unimation</a>. Initially developed by Unimation for <a href="/facts/General_Motors_Corporation/rBgP3IRK">General Motors</a>, the PUMA was based on earlier designs Scheinman invented while at <a href="/facts/Stanford_University/JEQeF9z2">Stanford University</a> based on sponsorship and mentoring from robot inventor <a href="/facts/George_Devol/Beob6xWJ">George Devol</a>.
Unimation produced PUMAs for years until being purchased by <a href="/facts/Westinghouse_Electric_Corporation/Nln2BzI3">Westinghouse</a> (ca. 1980), and later by Swiss company <a href="/facts/St%25C3%25A4ubli/nhhTwnC0">Stäubli</a> (1988). <a href="/facts/Nokia/bCleFoF4">Nokia</a> Robotics manufactured about 1500 PUMA robots during the 1980s, the Puma-560 being their most popular model with customers. Some own Nokia Robotics products were also designed, like <a href="https://archive.today/20120526015145/http://www.roboyhd.fi/images/stories/nokia_robot.jpg">Nokia NS-16 Industrial Robot</a> or NRS-15 
. Nokia sold their Robotics division in 1990.
In 2002, General Motors Controls, Robotics and Welding (CRW) organization donated the original prototype PUMA robot to the Smithsonian Institution's National Museum of American History. It joins a collection of historically important robots that includes an early <a href="/facts/Unimate/K7NNdbKF">Unimate</a> and the Odetics Odex 1.
The essence of the design is represented in three categories; 200, 500, and 700 series.
The 200 series is a smaller desktop unit. Notably, this model was used for the first robotic stereotactic brain biopsy in 1985.
The 500 Series and can reach almost 2 meters up. This model is the more popular design and is the most recognizable configuration.
The 700 series is the largest of the group and was intended for assembly line, paint, and welding work.
All designs consist of two main components: the mechanical arm and the control system. These are typically interconnected by one or two large multi-conductor cables. When two cables are used, one carries power to the servo motors and brakes while the second carries the position feedback for each joint back to the control system.
The control computer is based on the LSI-11 architecture which is very similar to PDP11 computers. The system has a boot program and basic debug tool loaded on ROM chips. The operating system is loaded from external storage through a serial port, usually from a floppy disk.
The control unit also contains the servo power supply, analog and digital feedback processing boards, and servo drive system.
The arm appears in the film <a href="/facts/Innerspace/vMKjxpRp">Innerspace</a>. An arm was displayed in the "Bird And The Robot" attraction at the <a href="/facts/World_of_Motion/8uX7cAFe">World of Motion</a> pavilion of <a href="/facts/EPCOT/As0a1TNT">EPCOT</a>.

Programmable Universal Machine for Assembly open-in-new

Programmable Universal Machine for Assembly