Orthotropic material

In <a href="/facts/Material_science/N5HrXRYW">material science</a> and <a href="/facts/Solid_mechanics/e1Yq50IS">solid mechanics</a>, orthotropic materials have material properties at a particular point which differ along three <a href="/facts/Orthogonal/JVIjYPog">orthogonal</a> axes, where each axis has twofold <a href="/facts/Rotational_symmetry/bpvJqcnS">rotational symmetry</a>. These directional differences in strength can be quantified with <a href="/facts/Hankinson%2527s_equation/fscT6e48">Hankinson's equation</a>.
They are a subset of <a href="/facts/Anisotropy/YMqTQWVB">anisotropic materials</a>, because their properties change when measured from different directions.
A familiar example of an orthotropic material is <a href="/facts/Wood/z13NpHPl">wood</a>. In wood, one can define three mutually perpendicular directions at each point in which the properties are different. It is most stiff (and strong) along the grain (axial direction), because most cellulose fibrils are aligned that way. It is usually least stiff in the radial direction (between the growth rings), and is intermediate in the circumferential direction. This anisotropy was provided by evolution, as it best enables the tree to remain upright.
Because the preferred <a href="/facts/Coordinate_system/Mtd0q4SP">coordinate system</a> is cylindrical-polar, this type of orthotropy is also called polar orthotropy. 
Another example of an orthotropic material is <a href="/facts/Sheet_metal/3yK7SwL4">sheet metal</a> formed by squeezing thick sections of metal between heavy rollers. This flattens and stretches its <a href="/facts/Grain_structure/nXSgR0wp">grain structure</a>. As a result, the material becomes <a href="/facts/Anisotropic/YMqTQWVB">anisotropic</a> — its properties differ between the direction it was rolled in and each of the two transverse directions. This method is used to advantage in structural steel beams, and in aluminium aircraft skins.
If orthotropic properties vary between points inside an object, it possesses both orthotropy and <a href="/facts/Inhomogeneous/y84KQJxl">inhomogeneity</a>. This suggests that orthotropy is the property of a point within an object rather than for the object as a whole (unless the object is homogeneous). The associated planes of symmetry are also defined for a small region around a point and do not necessarily have to be identical to the planes of symmetry of the whole object.
Orthotropic materials are a subset of <a href="/facts/Anisotropy/YMqTQWVB">anisotropic materials</a>; their properties depend on the direction in which they are measured. Orthotropic materials have three planes/axes of symmetry. An <a href="/facts/Isotropic/mc3QEY2x">isotropic</a> material, in contrast, has the same properties in every direction. It can be proved that a material having two planes of symmetry must have a third one. Isotropic materials have an infinite number of planes of symmetry.
<a href="/facts/Transverse_isotropy/tMKjMH7J">Transversely isotropic</a> materials are special orthotropic materials that have one axis of symmetry (any other pair of axes that are perpendicular to the main one and orthogonal among themselves are also axes of symmetry). One common example of transversely isotropic material with one axis of symmetry is a polymer reinforced by parallel glass or graphite fibers. The strength and stiffness of such a composite material will usually be greater in a direction parallel to the fibers than in the transverse direction, and the thickness direction usually has properties similar to the transverse direction. Another example would be a biological membrane, in which the properties in the plane of the membrane will be different from those in the perpendicular direction. Orthotropic material properties have been shown to provide a more accurate representation of bone's elastic symmetry and can also give information about the three-dimensional directionality of bone's tissue-level material properties.
It is important to keep in mind that a material which is anisotropic on one length scale may be isotropic on another (usually larger) length scale. For instance, most metals are polycrystalline with very small <a href="/facts/Crystallite/nXSgR0wp">grains</a>. Each of the individual grains may be anisotropic, but if the material as a whole comprises many randomly oriented grains, then its measured mechanical properties will be an average of the properties over all possible orientations of the individual grains.

Orthotropic material open-in-new

Orthotropic material