Open addressing

Open addressing, or closed hashing, is a method of <a href="/facts/Hash_table/Ht4ptDPF">collision resolution in hash tables</a>. With this method a hash collision is resolved by probing, or searching through alternative locations in the array (the probe sequence) until either the target record is found, or an unused array slot is found, which indicates that there is no such key in the table. Well-known probe sequences include:

<a href="/facts/Linear_probing/wCvUHGF3">Linear probing</a>
in which the interval between probes is fixed — often set to 1.
<a href="/facts/Quadratic_probing/cXGFSdN1">Quadratic probing</a>
in which the interval between probes increases linearly (hence, the indices are described by a quadratic function).
<a href="/facts/Double_hashing/6T3g22hk">Double hashing</a>
in which the interval between probes is fixed for each record but is computed by another hash function.
The main trade offs between these methods are that linear probing has the best <a href="/facts/Locality_of_reference/fYFKDv5q">cache performance</a> but is most sensitive to <a href="/facts/Primary_clustering/kw2R0ovW">clustering</a>, while double hashing has poor cache performance but exhibits virtually no clustering; quadratic probing falls in between in both areas. Double hashing can also require more computation than other forms of probing.
Some open addressing methods, such as <a href="/facts/Hopscotch_hashing/NDhG1LyL">Hopscotch hashing</a>, <a href="/facts/Hash_table/Ht4ptDPF"> Robin Hood hashing</a>, last-come-first-served hashing and <a href="/facts/Cuckoo_hashing/jGAUexI1">cuckoo hashing</a> move existing keys around in the array to make room for the new key. This gives better maximum search times than the methods based on probing.
A critical influence on performance of an open addressing hash table is the load factor; that is, the proportion of the slots in the array that are used. As the load factor increases towards 100%, the number of probes that may be required to find or insert a given key rises dramatically. Once the table becomes full, probing algorithms may even fail to terminate. Even with good hash functions, load factors are normally limited to 80%. A poor hash function can exhibit poor performance even at very low load factors by generating significant clustering, especially with the simplest linear addressing method. Generally typical load factors with most open addressing methods are 50%, while <a href="/facts/Hash_table/Ht4ptDPF">separate chaining</a> typically can use up to 100%.

Open addressing open-in-new

Open addressing